Pipe-Bending Machine TRANSFLUID DB4090 S

•  
  參考 1113-90022

  制造年度 2000

  运行小时数 不适用

• 供应商

  HD Werkzeugmaschinenhandel GmbH
  Robert-Bosch-Straáe 1
  35460 Staufenberg

  Germany

  

• 主要类别

  金属加工机床

• 类别

  用于管材、棒材和型材的拉拔、弯曲和矫直机

• 机器类型

  弯管机

• 制造商

  TRANSFLUID

• 描述

  tube diameter:40-90 mm
  wall strength:20 mm
  weight of the machine ca.:11 t
  dimensions of the machine ca.:4 x 1,6 x 1,35 m
  bending radius max.:270 mm
  
  This machine is a mandrel bending machine that was designed exclusively for the production of pipe bends with pipes of 40 mm ? 90 mm outer diameter with a maximum wall thickness of 20 mm or for processing solid materials up to 70 mm outer diameter (max. section modulus 64.7 cm³) and is therefore intended only for this purpose. Scope of delivery, machine equipment, basic equipment ? Pipe length/usable length for mandrel bending: 3000 mm ? Radius range max. 270 mm ? Bending height 1050 mm ? Electro-hydraulic drive ? Clockwise bending direction ? With hollow shaft to achieve small radii ? Counter bearing rotates ? Rotates up to 180 degrees with a maximum tool radius of 270 mm ? Forward movement controlled via hydraulic cylinder with pressure valve ? Retraction via hydraulic cylinder ? Counter bearing opens wide so that the angle of rotation unit can move just behind the bending tool ? With automatic sequence; one of the following functions can be activated via a key switch. ? Function activation can be done either via foot switch or hand switch ? At the manual operating level, all functions can be activated using a button in jog mode. ? In semi-automatic operating mode, the pipe is clamped after the first trigger, bent after the second trigger, and then the machine returns to its starting position. ? Manual tool retraction ? Counter bearing moves hydraulically to the pipe ? Automatic tool locking ? Hydraulic pipe clamping forwards/backwards ? Hydraulic components: Rexroth

• 国家

  二手