Oven - Electric RIEDHAMMER TR 18/4x33/10-E 90

•  
  參考 1113-90054

  制造年度 2020

  运行小时数 不适用

• 供应商

  HD Werkzeugmaschinenhandel GmbH
  Robert-Bosch-Straáe 1
  35460 Staufenberg

  Germany

  

• 主要类别

  金属加工机床

• 类别

  表面处理、准备

• 机器类型

  烤箱

• 制造商

  RIEDHAMMER

• 描述

  degree:900
  working heigth:100 mm
  width:4 x 330 mm
  dimensions of the machine ca.:20,4 x 3,5 x 2,5 m
  
  GENERAL INFORMATION
  ?Electrically heated roller kiln Mod. TR 18/4x33/10-E 90
  ?Condition: as new. Price as new 1,2 Mio. ?.
  ?Offer for immediate sale
  There are many different areas of application (e.g. burning in metal, roof tiles, etc.).
  SPECIFICATIONS
  
  The kiln is an electrically heated roller kiln. The product is mechanically transported through the kiln on a roller conveyor.
  The kiln is designed in such a way that no special foundation is required. The usual concreted, screededflat hall floor is sufficient.
  The dimensions of the sections of the plant, which consists of heating, sintering and cooling zones, are adapted to the requirements of the temperature curve.
  Temperatures and pressures in the kiln are controlled automatically.
  The kiln casings are modular. Each housing is lined with different bricks, which are optimally adapted to the different temperature requirements in the respective zones.
  This optimal wall construction achieves a low heat emission to the outside.
  FURTHER INFORMATION
  KILN ZONES
  The exhaust ports are located on the ceiling of the kiln and can be adjusted manually.
  The exhaust gas is led to a collecting pipe, post-combusted in a TNV (not included in the scope of delivery) and mixed with fresh air to lower the temperature. An induced draft fan conveys the flue gases to an on-site chimney, which is not included.
  The kiln is equipped with wire heating coils, which are installed above and below the roller level.
  The temperature of each control group is controlled by the PLC. Due to the high accuracy, a high control quality is achieved.
  The cooling zone is equipped with appropriate connections for direct and indirect air or water cooling.
  
  HOUSING
  The housings with a module length of approx. 1 m are made of a solid steel construction frame and are welded with corresponding metal sheets.
  All necessary cut-outs for heating elements, rollers, measuring points and inspection openings are already provided in the modules.
  In each kiln zone there are different masonry materials, which are adapted to the respective temperature requirements.
  SAFETY EQUIPMENT
  The equipment complies with the following directives:
  ?EC Machinery Directive 2006/42/EC
  ?EC Electromagnetic Compatibility 2014/30/EU
  

• 国家

  二手