DMU 40 (Reference-Nr. 040835)

•  
  參考 040835

  制造年度 2024

  运行小时数 不适用

• 供应商

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• 主要类别

  金属加工机床

• 类别

  加工中心

• 机器类型

  加工中心（通用）

• 制造商

  DMG MORI

• 控制权

  Siemens

• 描述

  
  

  General
  Universal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate
  Working area 1
  Longitudinal	550 mm
  Cross	450 mm
  Vertical	420 mm
  Technical Data
  Feed rate longitudinal/transverse/vertical	30000/30000/30000 mm/min
  Rapid traverse longitudinal/transverse/vertical	30/30/30 m/min

• 規格

  
  

  inlineMASTER® spindle	speed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® tools
  	Drive power (100% DC) 14,5 kW
  	Drive power (40% DC) 20,3 kW
  	Torque (100% DC) 84 Nm
  	Torque (40% DC) 121 Nm
  	Speed range 20 - 15000 rpm
  	Spindle taper SK40 Tool holder DIN ISO 7388-1-A
  	Clamping System DIN ISO 7388-3-A, AD
  Toolchanger with set up station for tool loading	Number of tools 30
  NC swivel rotary table	Swivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation
  Mechanical Preparation Oil-mist separator	Mechanical preparation for connection of an oil mist separator on customer side opening in cabin ø 200mm
  Chip removal package 20 bar / 245 l	Swarf removal package 20 bar / 245 l Coolant - air-blast changeover Swarf conveyor, scraper type with coolant supply 20 Bar / 290 psi, with one cartridge-Filter, tank capacity: 245 l / 64,72 US gallons, Spray gun for swarf removal Bed flushing, cabin roof
  Renishaw Blue Power Probe Kit	Renishaw Blue Power Probe Kit Infrared measuring probe PP 60 optical Laser tool measuring Renishaw NC4 blue Install on console beside working table, Tool lenght and diameter measuring automatically cleaning through external airblast Calibration tool with
  Preparation 3D Quickset	Machine preparation for use of the 3D quickSET Toolkit. included is the Softwareoption for 3D quickSET for one machine. 5 axis machine configurations (only with option touch probe)
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Service Agent	Service Agent Overview of all maintenance work on the machine

• 国家

  二手