CMX 50 U (Reference-Nr. 011181)

•  
  參考 011181

  制造年度 2022

  运行小时数 不适用

• 供应商

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• 主要类别

  金属加工机床

• 类别

  加工中心

• 机器类型

  加工中心（通用）

• 制造商

  DMG MORI

• 控制权

  Siemens

• 描述

  
  

  General
  Universal Milling Machines; Control: DMG MORI SLIMline® Multi-Touch control
  Working area 1
  Longitudinal	500 mm
  Cross	450 mm
  Vertical	400 mm
  Technical Data
  Feed rate longitudinal/transverse/vertical	30000/30000/30000 mm/min
  Rapid traverse longitudinal/transverse/vertical	30/30/30 m/min
  Floor space/Weight
  Dimensions (L x W x H)	3,15 x 2,86 x 2,71 (4,14 x 2,91 x 2,71) m
  Weight approx.	4700 Kg

• 規格

  
  

  Swivel Rotary Table Powered B/C Axes	Swivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!
  	Type of Measuring system Direct measuring system
  Main drive	Type of main drive AC
  	Mode for positioning only
  	5. Axes (swivelling range) -5/+110 x 0,001 degree
  	4. Axes (swivelling range) 360 x 0,001 degree
  	Distance between T-Slots 63 mm
  	Number of Slots 7
  	Slot width 14 mm
  	Maximum load (table centre) 200 Kg
  	Table surface Ø 630 x 500 mm
  	Drive power (40% DC) 13 kW
  	Drive power (100% DC) 9 kW
  	Speed range 20 - 12000 rpm
  	Spindle taper SK 40 DIN 69871
  	Clamping System DIN 69872
  Tool magazine	Application Vertical
  	Number of tools 30
  	Type of gripper Double gripper
  	Type of magazine Chain
  Machine without: Direct measuring system X,Y,Z	Machine without option: Direct Measuring System X, Y, Z inclusive air purge for measuring system, price reduction.
  DMG MORI IoTconnector	IoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the h
  Signal lamp with 4 colours standard	Signal lamp with 4 colours Red: General error Yellow: Intervention necessary Green: Automatic mode Blue: Setup mode
  Renishaw Touch Probe-Kit for SIEMENS control	Touch Probe-Kit for SIEMENS control Option includes: - PP40 Touch Probe with optical signal transmission; - TS27R Probe for Tool Measurement; - Calibration Tool; - Calibration Ring; - Case for equipment. Direct measuring system recommended
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b

• 国家

  二手