DMC 65 H duoBLOCK (Reference-Nr. 064043)

•  
  參考 064043

  制造年度 2012

  运行小时数 不适用

• 供应商

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• 主要类别

  金属加工机床

• 类别

  加工中心

• 机器类型

  加工中心（卧式）

• 制造商

  DMG MORI

• 控制权

  Siemens

• 描述

  
  

  General
  Horizontal Machining Centre; Control: 3D Control Siemens 840D solutionline
  Technical Data
  Feed rate longitudinal/transverse/vertical	60000/60000/60000 mm/min
  Rapid traverse longitudinal/transverse/vertical	60/60/60 m/min
  Working area 1
  Longitudinal	700 mm
  Cross	700 mm
  Vertical	700 mm
  Miscellaneous
  Clamping System	HSK-A 63

• 規格

  
  

  Cabine	Full protection cabin
  Main drive	Drive power (100% DC) 20 kW
  	Drive power (40% DC) 20 kW
  	Speed range - 12000 rpm
  	Spindle taper HSK-A 63
  NC rotary table with pallet changer	Type of Measuring system Direct measuring system
  	Table surface 500 x 500 mm
  	Centre bore 50 mm
  	4. Axes (swivelling range) 360 x 0,001 degree
  	Rotation speed max.4. Axis 40 rpm
  	Distance between T-Slots 100 mm
  	Number of Slots 5
  	Slot width 14 mm
  	Maximum load (table centre) 600 Kg
  Spindle taper HSK-A 63	Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)
  Tool magazine, chain vert., 80 pockets	Tool magazine Vertical chain magazine with 80 tool pockets
  Production package 40 bar/23 l/min, 980 l tank	Production package Coolant unit 980 l / 259 gallon, paper band filter Internal coolant supply 40 bar/23 l/min / 580 psi/6 gallon/min through spindle centre (AD) roof chip rinsing 300 l/min / 80 gallon/min (theoretical pump performance) through jets with n
  Direct measuring system X,Y,Z	Direct measuring system X-, Y-, Z-axis, Positional uncertainty: P=0.006 mm / 0.00024 in (VDI/DGQ 3441)
  Tool identification (TDS)	Tool identification (Tool Dialogue System TDS) Reading/Writing manually, without with a chip of Balluff BIS C for spindle
  Spray pistol with pump	Spray pistol with pump 1 bar/40 l/min 14.5 psi/10.4 gallon/min (theoretical pump performance)
  Oil and emulsion mist separator	Oil and emulsion mist separator Mechanical filter Throughput volume 1,100 m³/h
  Operation panel for loading station tool magazine	Control panel Siemens for loading station Tool magazine with TFT screen 8 Softkeys, alpha-numeric keyboard No parallel operation with CNC control.
  Special equipment	Production package such as module P-K0346, but with 80bar and vario valve Torque support bolt solution with 3-point system Automatic set-up station door 4/7 clamping hydraulics for work table and Set-up station for the connection of hydraulic Clamping
  Special equipment	3 air lines at the setup station must be independent from each other with valve (via switch on the control bar) can be switched with the setup station door open can. One switch per line (open / close)

• 国家

  二手