CTX 350 (Reference-Nr. 071643)

•  
  參考 071643

  制造年度 2023

  运行小时数 不适用

• 供应商

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• 主要类别

  金属加工机床

• 类别

  车床

• 机器类型

  4 轴或更多轴的数控车床

• 制造商

  DMG MORI

• 控制权

  Siemens

• 描述

  
  

  General
  2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate
  Working area
  Swing diameter over bed	650 mm
  Swing diameter over X linear guideways	370 mm
  Max machining diameter	320 mm
  Clamping chuck Ø	250 mm
  Y travel	+/-50 mm
  Z travel	550 mm
  Distance between spindle noses	800 mm
  X travel	250 mm
  Main drive 1
  Type of main drive	AC
  Drive power (100% DC)	13 kW
  Drive power (40% DC)	14 kW
  Speed range	-5500 rpm
  Torque (100% DC)	171 Nm
  Max. torque (40% DC)	192 Nm
  C-Axis Speed	100 rpm
  Torque of C-Axis (holding torque)	168 Nm
  Work spindle
  Spindle nose	A2-6
  Spindle diametre on front bearing	120 mm
  Spindle bore	73 mm
  Bar diameter max.	65 mm
  Tool holder 1
  Number of tool stations	12
  Number of driven tools	12
  Speed max.	6000 rpm
  Power max. (40% DC)	4,6 kW

• 規格

  
  

  Relieve cycle	Retraction of the axes at your fingertips in the end positions (only for outside machining) By pressing a button, the X-axis drive in manual mode on the positive end positions. Prepare for use as a rescue function or around the work area to set up.
  Pre-setting package w. spray gun & Alt speed	Pre-setting package: Option includes: - manual tool measuring probe made by MARPOSS - chip conveyor with right side discharge instead of chip tank - coolant spray gun 5 bar - signal lamp with 4 colours - technology cycle Alternating Spindle Speed
  12 bar/coolant set (with double cartridge filter)	12 bar coolant set Option includes: - high pressure pump 12 bar; - double cartridge filter for coolant When one filter is stuck (warning on cnc), operator can manually switch the coolant flow to the second one and clean or change the plugged filter witho
  3-jaw chuck, BBD 210-66, make SMW	3-jaw power clamping chuck with through-hole, type BBD 210/66, make SMW-Autoblok, incl. connecting elements
  Food switch for tailstock operation	Foot switch for tailstock operation
  Set of three driven tool holder for V3/V4 by Algra	Set of driven tool holders made by ALGRA with VDI 30 shaft for V3/V4 versions for ER 25 collets for drilling/milling operations Option includes: - 2x driven tool holder 0° ER 25 - 1x driven tool holder 90° ER 25 (with offset) - 1x wrench for set-up of h
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Service Agent	Service Agent Overview of all maintenance work on the machine

• 国家

  二手